iS1 Series

IS1 SERIES

NEW Stamtec iS1 Series

Direct Drive Servo Press (Powered by Siemens). Stamtec’s Servo Motor Drive Technology, the standard electric motor, flywheel, and clutch/brake are replaced with a high-torque, low-rpm servo motor.  Proprietary press controls specifically designed for the servo press to achieve a wide variety of stroke lengths and slide movement profiles, while supplying full working energy capacity even at low speeds. This allows the user to perform a wide variety of jobs in one press (e.g. drawing, re-strike, warm forming, etc.) and easily adapt to automation and feed applications. In addition, user-defined motion curves allow up to 20 various segments in a cycle curve, defined by slide position, speed, and pause duration parameters.

Tonnage Range: 88 - 286

Capacity

US Tons:  D: 88 C: 88
Metric Tons: D: 80 C: 80

Rated tonnage point

(in.): D: 0.20 C; 0.20
(mm.) D: 5 C: 5

Stroke length

(in.): D; 7.09 C: 7.09
(mm.): D: 180 C: 180

Speed

SPM: D: ~ 80 C: ~ 80

Die height

(in.): D: 13.78 C: 13.78
(mm.): 350    350

Slide area (L-R X F-B)

(in.): D: 27.56 x 18.11 C: 27.56 x 18.11
(mm.): D: 700 x 460 C: 700 x 460

Bolster area (L-R X F-B)

(in.): D: 35.43 x 23.62 C: 46.06 x 23.62
(mm.): D: 900 x 600 C: 1170 x 600

Bolster thickness

(in.): D: 3.94 C: 3.94
(mm.): D: 100 C: 100

Side frame opening (window)(F-B x H)

(in.):   25.59 x 18.11    --
(mm.):  650 x 460    --

Maximum die weight

(lbs.): D: 13.58 C: 13.58
(Kgs.) D: 345 C: 345

Slide adjustment    

(in.): D: 3.15 C: 3.15
(mm.): D: 80 C: 80

Slide adjusting motor    

Kw x p: D: 0.4 x 4 D: 0.4 x 4

Working height

(in.): D: 32.68 C: 32.68
(mm.): D: 830 C: 830

Air pressure required

PSI: D: 71.12 C: 71.12
kg / cm2: D: 5 C: 5