USED TRAK DPM S5 BED MILL

USED NUMBER: 1361

Used Southwestern Industries
2004 TRAK DPMS3 Bed Mill with the Prototrak SM CNC

S/N 044AR13024

USED1361

DPMS3 Machine Specifications

• Table Size - 50” x 10”
• T-Slots - 3 x .63” x 2.48”
• Travel (X,Y,Z) - 30” x 17” x 23.5”
• Maximum Quill Travel - 5”
• Quill Diameter - 3 15/16”
• Spindle Taper - NST 40
• Spindle Speed Range - 70-4200 rpm
• Spindle Center to Column Face - 19”
• Spindle Motor - 3HP
• Power Requirement Control - 110V; 1P; 10A
• Power Requirement Machine - 220/440V; 3P; 8.5/4.25A
• Maximum Weight on Table - 1320 lb.
• Height of table from bottom of bed - 38”
• Maximum spindle nose to table - 23.5”
• Minimum height - 85”
• Maximum height - 95”
• Width of machine including table - 73”
• Length with electric box door closed - 76”
• Overall width including full table traverse - 108”
• Overall length with electrical door open - 70”
• Footprint of machine - 24” x 44”
• Weight– 4100 Lbs.
• Maximum work capacities in mild steel - drilling, 1” dia.; tapping, ¾”; milling, 3 in³/min
• Maximum rapid feed - 150 IPM
• Wide way surfaces are hardened and ground
• Slide ways Turcite coated
• Precision ground ballscrews installed in the table, ram and column
• Solid ram moves up and down for Z-axis operation, providing mass for heavy cuts
• Real handwheels so you can work manually

Hardware Specifications

• Two or three-axis CNC, three-axis DRO
• Pentium processor with built-in video and Ethernet cards
• 32 MB or RAM with expansion slots available
• Flash drive
• TEAC floppy disk drive
• Ports and connectors: P/S 2 keyboard and mouse, RS232, RJ45
• 4” color active-matrix display
• Override of programmed feedrate and rapid with graphical indicator
• Polycarbonate sealed membrane with LED status lights
• Gasket sealed enclosures
• Servo motors - 560 in-oz torque
• Integrated ram and quill encoders

Software Specifications

• Windows operating system
• Selectable two or three-axis CNC
• Auto Geometry Engine
• Automatic diameter cutter compensation
• Two or three-axis circular interpolation
• Rotate
• Look - Program graphics with a single button push
• Linear interpolation
• Six modes of operation
• Color graphics with adjustable views
• Tool length offset with modifiers
• Advanced diagnostic routines
• Jog and Powerfeed in DRO mode
• Automatic return to ABS zero
• Incremental and Absolute position readout
• Inch/mm selectable
• Teach-in of manual moves.
• Alpha-numeric program names
• Scaling of print data
• Event comments
• Selectable Tool Path or Part Geometry programming
• Convenient canned cycles for all geometry
• Circular, rectangular or irregular pockets, islands and profiles
• Helix and thread milling routines
• Subroutine and copy of programmed events
• Mirror with selectable cutting order
• List step - graphics with programmed events displayed
• Conrad - one input for automatic corner radius
• Incremental and Absolute programming
• Program diagnostics
• CAD/CAM interface
• Math Helps with prompted, graphical interface
• Tool stepover adjustable for pocket routines

• Selectable ramp or plunge cutter entry
• Spreadsheet editing
• Global data change
• Clipboard to copy events between programs
• Trial run
• Real time run graphics with tool icon
• Access to networked drives
• Automatic file back up routine
• Program converters

Option Included:

• Work light
• Coolant system
• Power Draw bar